CS Site Specific Factor--Prostate: Does perineural invasion affect the coding of SSF3, pathologic extension? See Description.
"Adenoca scattered over a 2.5 cm region bilaterally toward the apex. Perineural invasion is identified, including within the right apex." Does this mean that there is extension into the apex?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.For cases diagnosed 2004 and forward:
Presence or absence of perineural invasion does not affect pathologic extension. Most likely perineural invasion is still localized. It means that there is tumor found along the track of the nerves in the prostate. Where the nerves enter the prostate, the capsule is thinner than in other areas; thus pathologists make note of the potential for extracapsular extension.
The CAP Cancer Protocol for Prostate states that perineural invasion "has been associated with a high risk of extraprostatic extension...although the exact prognostic significance remains to be determined."
Based on the available information, code the case example to 023 [Involves both lobes].
CS Site Specific Factor--Prostate: Given that the CS Manual instruction is to code the highest PSA value recorded in the medical record, can a PSA value obtained a year prior to admission be used to code the SSF 1 and SSF2 fields?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
The PSA recorded in CS SSF 1 and 2 must be documented in the medical record. Record the highest PSA value prior to diagnostic biopsy or treatment. If the highest PSA value documented in the medical record is from the previous year, record it.
CS Site Specific Factor--Prostate: How are SSF 5 (Gleasons Primary and Secondary Pattern Value) and SSF 6 (Gleasons Score) coded when there is a higher Gleason's pattern in less than 5% of the tumor? See Discussion.
Radical prostatectomy pathology states prostate adenocarcinoma "combined Gleasons score 3+3=6, with a small portion of Gleasons pattern 4 component comprising less than 5% of tumor volume."
The WHO Classification of Tumors of the Urinary System and Male Genital Organs refers to "tertiary" Gleasons patterns in addition to the primary and secondary patterns. On prostatectomy, when this tertiary pattern is 4 or 5, WHO recommends that it should be reported in addition to the Gleasons score even when it is less than 5% of the tumor.
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Record Gleason's pattern and score from the largest specimen, even if this is a lower number. Ignore the tertiary pattern for now.
This may change when the AJCC 7th Edition is published, as there is much discussion regarding the tertiary patterns and when they should be utilized. If there is a change in AJCC, at that time there will be a change to CS.
CS Site Specific Factor--Prostate: How is SSF 6 coded for this site when there is only one Gleason number documented and the number is less than 5 (e.g., Gleasons 3)?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code 999 [unknown or no information]. Note 1 was revised in September 2006 to clarify this situation.
Note 1 states "If only one number is given and it is less than or equal to 5, code the total score to 999, unknown or no
CS Site Specific Factor--Prostate: Is there an established range of values that can be used to code negative, borderline or elevated PSA values? See Discussion.
Previous SEER prostate coding guidelines listed a PSA range that could be used to code negative, borderline, or elevated values in the absence of any statement concerning elevated PSA in the medical record. Is this still in effect for SSF 2, or do we need a definite statement when only a numeric value is given?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
This matter is under consideration by the CS Steering Committee. The CS Steering committee is reviewing options for incorporating SEER guidelines into the CS manual.
CS Site Specific Factor--Prostate: Please clarify how SEER registries should use code 040 for Site-Specific Factor 3 on prostate cases. See Discussion.
The 6/11/09 NAACCR Webinar on prostate cancer pointed out that SSF 3 code 040 refers the registrar to Note 4, which states "when the apical, distal urethral, bladder base, or bladder neck margins are involved and there is no extracapsular extension, use code 040." The webinar went on to say that code 040 ONLY applies to these specific margins, and that if other margins are involved (for example, the 'right lateral margin'), we should not use code 040. Is this consistent with SEER's interpretation of Note 4? Are we to ignore involvement of margins other than those specified in Note 4, and consequently code SSF 3 within the 000-032 range? Would this also apply to code 048 (extracapsular extension and margins involved)?
Yes, SEER agrees. Code SSF3, code 040 per page C-740 of 2007 SEER manual exactly as stated in Note 4. According to the Inquiry and Response System of the CoC, Note 4 lists specific margins that were once thought to have a prognostic impact. Code 040 in SSF3 should be used only when those margins are involved.
CS Site Specific Factor/CS Lymph Nodes--Breast: If the ITCs are greater than 0.2 mm, how are these fields coded?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Lymph nodes with metastases greater than 0.2 mm are counted as positive. Code in CS Lymph Nodes and CS Regional LN Positive. Do not code ITC's greater than 0.2 mm in CS Site Specific Factor 4.
CS Site Specific Factor/Melanoma: How is CS SSF1 (depth of invasion) coded for a melanoma that demonstrates dermal invasion to a depth of "less than .2 mm" be coded to 999 [unknown]? See Discussion.
The path report says "superficial spreading malignant melanoma; 2 areas of papillary dermal invasion to depth of less than .2mm."
The revised CS pages include codes for "less than" a certain tumor size, but these are not included in the depth of invasion SSF. Using 999 results in an unstageable melanoma, when we know it is "less than .2mm".
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code SSF1 (depth of invasion) to 019 [.19mm]. For any case with an SSF1 code in the range of 001-100 mm, the T category will be determined using CS extension and SSF2 [ulceration]. All cases with an SSF1 code in the range of 001-100 mm will map to a T1 (either T1NOS, T1a or T1b).
CS Site Specific Factor/Terminology--Breast: Does the term "focal areas" of in situ carcinoma qualify as "minimal" in situ component when coding SSF6 field (assessment of the invasive and in situ components present) in the CS breast scheme?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Yes, the term "focal areas" of in situ carcinoma describes a minimal in situ component.
CS Size of Tumor/CS Extension--Brain and CNS: How should these fields be coded for benign CNS tumors?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS Extension as 05 [Benign or borderline brain tumors]. Code the size of the tumor if specified. Otherwise code CS Tumor Size as 999 for benign CNS tumors.
An official website of the United States government
Home