Report | Question ID | Question | Discussion | Answer | Year |
---|---|---|---|---|---|
|
20041075 | CS Tumor Size: Can we take the size of a "polypoid" mass? See Discussion. | 3/04 Colonoscopy: 4 cm semi-circumferential friable mass in sigmoid colon. Path: Tubulovillous adenoma indeterminate for malignancy. 4/04 Sigmoid Colectomy: 5 x 4 polypoid mass: WD Adenocarcinoma arising in a tubulovillous adenoma. Define "Polypoid". Size of "polypoid" mass. Would the size be coded to 050 or 999? |
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.If the pathology report confirms that the entire polyp is malignant, code the size of the polyp/polypoid mass. If the pathology report does not confirm that the entire polyp is malignant, code 999. Code tumor size as 999 [Unknown] for the example above. Do not code the size of the polypoid mass in this example. The size given above is the size of the polypoid mass, not the size of the malignancy. Polypoid means "Like a polyp. |
2004 |
|
20091045 | CS Tumor Size/CS Site Specific Factor--Breast: When tumor size is unknown, but it is known that both in situ and invasive components are present, how should CS Tumor Size and SSF6 be coded? See Discussion. | We coded CS Tumor Size 990 and SSF 6 to 060 for a case in which no tumor size was mentioned and the breast core biopsy identified microinvasive infiltrating lobular carcinoma and lobular carcinoma insitu. The lumpectomy identified no residual tumor. SEER edit 218 states we must have CS Tumor Size as 999 if the CS SSF 6 is 060. Yet the tumor size code of 990 (Microinvasion; microscopic focus or foci only, no size given; described as less than 1 mm) would more accurately reflect this case. Even in a situation where there was microinvasion described as less than 1mm, the edit will not allow one to code CS Tumor Size to 990 with the CS SSF 6 as 060. Should these types of cases have CS Tumor Size coded 999 or should the edit be adjusted to allow for this combination? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS tumor size 990 [Microinvasion; microscopic focus or foci only, no size given; described as less than 1 mm] and CS SSF6 050 [Invasive and in situ components present, size of entire tumor coded in CS Tumor Size because size of invasive component not stated AND proportions of in situ and invasive not known].
This combination of codes captures the information available for this case. |
2009 |
|
20061039 | CS Tumor Size/CS Site Specific Factor--Breast: Should the tumor size be coded to 1.5 cm or 2.5 cm and SSF6 coded to 020 or 030 respectively for a tumor with invasive and in situ components described as being a 2.5 cm tumor with a "greater than" 1.5 cm invasive portion? See Discussion. | Should tumor size be coded to 1.5 cm and SSF6 coded to 020 [Invasive and in situ components present, size of invasive component stated and coded in CS Tumor Size] or should the tumor size be 2.5 cm with SSF6 coded to 030 [Invasive and in situ components present, size of entire tumor coded in CS Tumor Size because size of invasive component not stated and in situ described as minimal (less than 25%)]? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2. Code CS tumor size 992 [stated as greater than 1 cm] and SSF6 code 020. The September 2006 revision to the CS Tumor Size table now lists the 992-995 range codes as "greater than ___ cm." It is better to code the invasive size than the entire size of the tumor. In the TNM mapping, this would more accurately portray the tumor as T1c rather than T2. |
2006 |
|
20071115 | CS Tumor Size/CS Site Specific Factor--Breast: How do you code the CS Tumor size and SSF6 fields for a breast cancer described as "Paget disease with underlying intraductal carcinoma (4cm x 3.2cm)"? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.CS Tumor Size: Assign code 040 for tumor size and code SSF6 as 050 [Invasive and in situ components present, size of entire tumor coded in CS TS]. The size of the invasive component is not stated AND proportions of in situ and invasive are not known. |
2007 | |
|
20051002 | CS Tumor Size/CS Site Specific Factor 6--Breast: How are these fields coded for a tumor stated to have only in situ disease in the breast with bone metastasis identified on scan? See Discussion. | 4/20/04 Quadrantectomy: "Tumor involves a significant portion of the biopsy and is estimated at 10 cm in greatest dimension." The only other mention of size is from imaging studies which is 3.5 cm. The histology is "high grade ductal carcinoma with comedo necrosis. No invasive carcinoma identified." Bone scan on 4/20/04 shows "widespread metastatic disease to bone." By rule the behavior code for this case is changed to malignant. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2. Code tumor size as 100 [10 cm]. Size from pathology or operative report is preferred over size from imaging.
Code SSF6 as 050 [Invasive and in situ components present, size of entire tumor coded in CS Tumor Size because size of invasive component not stated and proportions of in situ and invasive not known.]
There is invasive tumor present (as proven by the bone metastasis), but the size and proportion of the invasive component is unknown.
Please note: Extension must be coded at least to 10 [Confined to the breast tissue and fat including nipple and areola; Localized, NOS] in this case. Do not assign extension code 00 [in situ]. |
2005 |
|
20041064 | CS Tumor Size/CS Extension/CS TS/Ext-Eval--Breast: How do you code these fields when the tumor size and extension differ pre and post treatment with neoadjuvant Arimidex? See Discussion. | Clinically on PE 3 cm mass attached to skin with dimpling and erythema overlying the mass. Ultrasound: 2-3 cm breast mass with overlying skin thickened by US evaluation, suggesting dermal invasion. Neoadjuvant Arimidex followed by MRM. Path: 4.5 cm ductal carcinoma (no DCIS), no invasion of skin. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Record the larger tumor size and the farthest extension documented.
Code CS Tumor Size/Extension Evaluation to 6 [Surgical resection performed, WITH pre-surgical systemic treatment...; tumor size/extension based on pathologic evidence].
Code CS Tumor Size for the example to 045 [4.5 cm].
Code CS Extension to 20 [Local skin involvement ...] based on clinical description provided. |
2004 |
|
20051061 | CS Tumor Size/CS Extension/CS Lymph Nodes--Lung: How are these fields coded when there is no description of a primary lung tumor, lymph node biopsies are negative, but biopsy of a "level 7 mass" is positive for squamous cell carcinoma? See Discussion. | Example: Chest CT: Enlarging subcarinal mass, 3.4 cm, is most likely malignant adenopathy or perhaps primary tumor. The clinician subsequently described a patient history of mediastinal lymphadenopathy. He stated that a PET scan revealed multifocal thoracic disease consistent with stage 3B carcinoma. This was followed by mediastinoscopy with lymph node biopsies (all negative) but the biopsies of "level 7 mass and subcarinal level 7 mass" showed squamous cell carcinoma. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.If this case is determined to be a lung primary, code the CS fields: CS Tumor Size: 999 [Unknown] CS Extension: 99 [Primary tumor cannot be assessed] CS Lymph Nodes: 20 [Subcarinal lymph node involvement] based on positive level 7 biopsy, history of mediastinal lymphadenopathy and subcarinal "adenopathy" per CT. |
2005 |
|
20071085 | CS Tumor Size/CS Extension--Prostate: Because prostatectomy results are excluded from the CS Extension field for prostate, is code 95 [No evidence of primary tumor] accurate to reflect bilateral lobe involvement of prostate cancer when it is incidentally found following a radical cystectomy for a bladder primary? Why must tumor size be 000 when the CS Extension code is 95? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code prostate CS Extension to 99 [Extension unknown] and code CS Tumor Size according to the information available from the surgery. CS Extension code 95 [No evidence of primary tumor] should be used only in that rare situation when the only evidence of disease is distant mets or lymph node involvement, no primary tumor found. That is why CS tumor Size must be 000 when CS Extension code 95 is used. |
2007 | |
|
20051052 | CS Tumor Size/CS Extension--Brain and CNS: How are these fields coded for a glioblastoma multiforme occurring in a 3.5 cm tumor in the parietal lobe and a 3.0 cm tumor in the occipital lobe? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2. CS Extension code is 10 [confined to cerebral hemisphere]. Record the size of the largest lesion in CS Tumor Size. Both the occipital and parietal lobes are supratentorial and confined to the cerebral hemisphere with no mention of crossing midline or involvement of ventricles. |
2005 | |
|
20051003 | CS Tumor Size/CS Eval--Breast: How are these fields coded when there is a clinical size recorded but the tumor size is not specified on the pathology report associated with a subsequent resection? See Discussion. | 4/8/04 excisional biopsy of 1.5 cm palpable mass. Path: gives a specimen size only and states that there is a nodular firm area that correlates with the clustered microcalcification on radiograph. No pathologic tumor size is given. Would the size be coded to the clinical size of 1.5 cm? The patient did have surgery but the only size available is a clinical one. Because the size is clinical, is the CS Eval field coded to 0 [No surgical resection done. Evaluation based on PE...]? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2. Clinical size can be coded when the patient has had surgery. For the case above, code the tumor size as 015 [1.5 cm] using the clinical information. The CS Tumor Size/Extent Eval field refers to both tumor size and extension. In this case, record the eval field as 0 or 1 (which ever is appropriate). The tumor size sets the T category unless the resection shows skin or chest wall or dermal lymphatic involvement. |
2005 |