CS Tumor Size--Breast: How is this field coded when a core needle biopsy removes the majority of the tumor? See Discussion.
Rule 4.j on page 128 of the 2004 SEER Manual states "Do not code the tumor size from a needle biopsy unless no residual tumor is found on further resection".
Example: 3/04/04 core biopsy Rt breast grade 1 infiltrating ductal carcinoma tumor size 0.8cm. 3/10/04 Lumpectomy: 3mm focus of residual infiltrating ductal carcinoma. If we can not take the size of the core needle biopsy, do we use the residual size of 3mm or the clinical size which was 1cm on mammogram?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code the tumor size from the mammogram. Do not code the tumor size from the needle biopsy because residual tumor was present in the lumpectomy specimen.
CS Tumor Size--Breast: How is this field coded for a 1.5 cm clinically palpable tumor that appeared to be a cyst with a papilloma when the partial mastectomy Path Micro stated the lesion was an "intraductal papilloma with focal noninvasive papillary carcinoma"? See Discussion.
Should the size be coded to 999 [unknown] because the noninvasive papillary carcinoma is described only as "focal" and is not measured and it is not known how much of the tumor is benign and how much is in situ. Or would the size be coded to the size of the palpable mass, 1.5 cm?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code CS tumor size as 999 [unknown]. Size of the focal noninvasive papillary carcinoma is not stated.
CS Tumor Size--Breast: How is this field coded for DCIS that is present in scattered small foci over five of eight slides, and the greatest aggregate dimension measures 0.5 cm? See Discussion.
Breast biopsy was prompted by abnormality seen on mammography. Would this be an example of when to code 996 (mammographic/xerographic diagnosis only, no size given; clinically not palpable) applies for the CS Tumor Size field?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Assign code 005 [0.5 cm] in this case. According to the General Instructions for CS tumor size, it is acceptable to code an aggregate size stated by the pathologist (see instruction 4.i).
CS Tumor Size--Breast: Do the tumor size instructions in the CS Manual take priority over those in the SEER manual? See Discussion.
In regards to priority order of sources to be used in coding size for breast and lung, we are instructed to use the site-specific instructions in the 2004 SEER Manual over the general instructions in the CS Manual (see SINQ 20061109). Thus, physical exam size would be used over an imaging size. I&R question 2389 instructs registrars to use an imaging size over a physical exam size. This inconsistency creates confusion for them. Do the answers given in I&R not take into account the information in the SEER Manual? As a SEER Registry, which rules do we tell our hospitals to use? Are ACoS accredited hospitals required to use I&R over SINQ?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.The current SEER instructions and the CS instructions for source of tumor size information are the same. The tumor size priority source instruction in the 2004 SEER manual is not included in the 2007 SEER manual. SINQ 20061109 has been updated for clarification. There is no conflict between SEER instructions and I&R instructions at this time. SEER and the CoC collaborate, endeavoring to provide consistent instructions and to resolve inconsistencies.
CS Tumor Size--Bladder: Is tumor size coded to 080 when the bladder mass is described as "greater than 8 cm in diameter"?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Based on the information provided above, code CS tumor size 080 [8 cm]. Code the information that is avaliable. Since size of tumor is not used to stage bladder cancer, an approximation is adequate.
CS Size of Tumor/CS Extension--Brain and CNS: How should these fields be coded for benign CNS tumors?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS Extension as 05 [Benign or borderline brain tumors]. Code the size of the tumor if specified. Otherwise code CS Tumor Size as 999 for benign CNS tumors.
CS Site Specific Factor/Terminology--Breast: Does the term "focal areas" of in situ carcinoma qualify as "minimal" in situ component when coding SSF6 field (assessment of the invasive and in situ components present) in the CS breast scheme?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Yes, the term "focal areas" of in situ carcinoma describes a minimal in situ component.
CS Site Specific Factor/Melanoma: How is CS SSF1 (depth of invasion) coded for a melanoma that demonstrates dermal invasion to a depth of "less than .2 mm" be coded to 999 [unknown]? See Discussion.
The path report says "superficial spreading malignant melanoma; 2 areas of papillary dermal invasion to depth of less than .2mm."
The revised CS pages include codes for "less than" a certain tumor size, but these are not included in the depth of invasion SSF. Using 999 results in an unstageable melanoma, when we know it is "less than .2mm".
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code SSF1 (depth of invasion) to 019 [.19mm]. For any case with an SSF1 code in the range of 001-100 mm, the T category will be determined using CS extension and SSF2 [ulceration]. All cases with an SSF1 code in the range of 001-100 mm will map to a T1 (either T1NOS, T1a or T1b).
CS Site Specific Factor/CS Lymph Nodes--Breast: If the ITCs are greater than 0.2 mm, how are these fields coded?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Lymph nodes with metastases greater than 0.2 mm are counted as positive. Code in CS Lymph Nodes and CS Regional LN Positive. Do not code ITC's greater than 0.2 mm in CS Site Specific Factor 4.
CS Site Specific Factor--Prostate: Please clarify how SEER registries should use code 040 for Site-Specific Factor 3 on prostate cases. See Discussion.
The 6/11/09 NAACCR Webinar on prostate cancer pointed out that SSF 3 code 040 refers the registrar to Note 4, which states "when the apical, distal urethral, bladder base, or bladder neck margins are involved and there is no extracapsular extension, use code 040." The webinar went on to say that code 040 ONLY applies to these specific margins, and that if other margins are involved (for example, the 'right lateral margin'), we should not use code 040. Is this consistent with SEER's interpretation of Note 4? Are we to ignore involvement of margins other than those specified in Note 4, and consequently code SSF 3 within the 000-032 range? Would this also apply to code 048 (extracapsular extension and margins involved)?
Yes, SEER agrees. Code SSF3, code 040 per page C-740 of 2007 SEER manual exactly as stated in Note 4. According to the Inquiry and Response System of the CoC, Note 4 lists specific margins that were once thought to have a prognostic impact. Code 040 in SSF3 should be used only when those margins are involved.
An official website of the United States government
Home