CS Site Specific Factor/Melanoma: How is CS SSF1 (depth of invasion) coded for a melanoma that demonstrates dermal invasion to a depth of "less than .2 mm" be coded to 999 [unknown]? See Discussion.
The path report says "superficial spreading malignant melanoma; 2 areas of papillary dermal invasion to depth of less than .2mm."
The revised CS pages include codes for "less than" a certain tumor size, but these are not included in the depth of invasion SSF. Using 999 results in an unstageable melanoma, when we know it is "less than .2mm".
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code SSF1 (depth of invasion) to 019 [.19mm]. For any case with an SSF1 code in the range of 001-100 mm, the T category will be determined using CS extension and SSF2 [ulceration]. All cases with an SSF1 code in the range of 001-100 mm will map to a T1 (either T1NOS, T1a or T1b).
Ambiguous Terminology: Why do the instructions for this field use the term "accession" rather than "abstract"?
The purpose of the new data item "Ambiguous Terminology" is to identify cases that were put into the cancer registry database without a conclusive diagnosis. The decision to accession the case was influenced by ambigous terminology. The emphasis is on accessioning the case rather than abstracting it.
Flag: For cases diagnosed prior to 2001, how is the ICD-O-3 Conversion Flag set if the ICD-O-2 and ICD-O-3 histology and behavior fields are both directly coded, as registrars in this region are instructed to do when submitting late cases, and as a result no conversion is necessary? Is it to 0 [Morphology (Morph--Type&Behav ICD-O-3 originally coded in ICD-O-3)] or Blank [Not converted]?
Assign code 3 [converted with review].
In your scenario above, ICD-O-2 and ICD-O-3 are being independently coded which should yield the same result as converting the case and then reviewing it.
Otherwise, if there is an ICD-O-3 code which differs from the ICD-O-3 code based on the conversion criteria, it will trigger an edit.
Multiplicity Counter/CS Tumor Size: The Multiplicity Counter rule 6c states "Use code 99 when the tumor is described as diffuse". Is code 99 used in all circumstances when tumor size is coded to 998? See Discussion.
The CS manual lists esophagus, stomach, familila/familial polyposis (colon), lung, and breast as the only circumstances when code 998 is valid. If this is correct, then if TS is coded to 998, then Multiplicity Counter must be 99.
If the number of tumors is known, code the number in Multiplicity Counter. If the number of tumors is not known, assign code 99. If "diffuse" is the only information available to describe the tumor, assign code 99.
MP/H rules/Histology--Lung: How is histology coded for a path diagnosis of "pleomorphic carcinoma with adenocarcinoma, squamous, clear cell and spindle components"? Please see discussion.
Path diagnosis of lung tumor is pleomorphic carcinoma, with adenocarcinoma, squamous, clear cell, and spindle cell components. Path comment states: "While the majority of tumor displays usual adenocarcinoma-type features, elsewhere the tumor shows varying differentiation, including squamous, clear cell and spindle cell differentiation. Therefore the tumor is best categorized as pleomorphic carcinoma."
This tumor is best described by a non-specific histology. However, the MP/H rules guide the abstractor to identify a more specific histology. If we work through the lung rules, would we end up using rule H7 and code the histology with the numerically highest ICD-O-3 code?
For cases diagnosed 2007 or later, assign histology code 8022 [pleomorphic carcinoma] based on the pathologist's assessment and rule H3. He/she reviewed all of the histologic components and rendered a final diagnosis of pleomorphic carcinoma.
"Components" is not a term indicative of a more specific histology. See note under rule H5.
CS Tumor Size/CS Extension--Prostate: Because prostatectomy results are excluded from the CS Extension field for prostate, is code 95 [No evidence of primary tumor] accurate to reflect bilateral lobe involvement of prostate cancer when it is incidentally found following a radical cystectomy for a bladder primary? Why must tumor size be 000 when the CS Extension code is 95?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code prostate CS Extension to 99 [Extension unknown] and code CS Tumor Size according to the information available from the surgery.
CS Extension code 95 [No evidence of primary tumor] should be used only in that rare situation when the only evidence of disease is distant mets or lymph node involvement, no primary tumor found. That is why CS tumor Size must be 000 when CS Extension code 95 is used.
MP/H Rules/Histology--Colon: Regarding histology rule H21, is there a hierarchy or do you code the higher histology if there is an adenocarcinoma arising in a polyp and an adenocarcinoma in a villous adenoma?
For cases diagnosed 2007 or later:
If you arrive at H21 and have an additional decision to make regarding the use of 8210, 8261 or 8263, you must make another pass through the histology rules. The second pass will determine which of the two or three histology codes to assign. The answer will vary depending of the specifics of the case.
Example:
Transverse colon: Adenocarcinoma in an adenomatous polyp involving muscularis propria and adenocarcinoma in a villous adenoma involving subserosa of transverse colon. Start with rule H15 because there are multiple tumors. Stop at H21 -- code either 8210 or 8261. To decide between 8210 and 8261, make a second pass through the histology rules, starting again with H15. Stop at H20. Code the histology of the most invasive tumor, 8210 [Adenocarcinoma in adenomatous polyp].
CS Tumor Size/CS Site Specific Factor--Breast: How do you code the CS Tumor size and SSF6 fields for a breast cancer described as "Paget disease with underlying intraductal carcinoma (4cm x 3.2cm)"?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.CS Tumor Size: Assign code 040 for tumor size and code SSF6 as 050 [Invasive and in situ components present, size of entire tumor coded in CS TS]. The size of the invasive component is not stated AND proportions of in situ and invasive are not known.
MP/H Rules/Multiple Primaries/Histology--Prostate: How many primaries should be abstracted and how should the histology field(s) be coded for a case in which the pathology specimen showed adenocarcinoma in 20% of the tissue and sarcoma in 50% of the tissue? See Discussion.
Patient has TURP. The final path diagnosis is adenocarcinoma in 20% of tissue and sarcoma in 50% of tissue.
Because it is unknown whether there is a single or multiple tumors, rule M1 (Other Sites) is used which states the case is to be abstracted as a single primary.
Single invasive histology rules are followed to rule H16, but table 2 does not contain a mixed code for this situation, even though ICD-O-3 has a code 8933/3 for "adenosarcoma". Therefore, rule H17 is applied that states to use the highest code, which in this case would be 8800/3 [Sarcoma, NOS]. Is this correct?
For cases diagnosed 2007-2014, code as two primaries, one adenocarcinoma and the other sarcoma.
This is two tumors (adenocarcinoma and separate sarcoma) until proven otherwise. Do not code as adenosarcoma, as this is a gyn-specific diagnosis. Adenosarcoma of the prostate is not a recognized entity in the WHO classification of prostate tumors.
Primary Site: Is an "angiosarcoma" stated as arising in the skin of the breast and treated with a mastectomy, coded to the primary site of skin or breast?
Code the primary site as skin of breast when skin of breast is documented as the site of origin.
According to the WHO classification of soft tissue tumors, the majority of angiosarcomas "develop as cutaneous tumors...less than one quarter present as a deep soft tissue mass."