Report | Question ID | Question | Discussion | Answer | Year |
---|---|---|---|---|---|
|
20051061 | CS Tumor Size/CS Extension/CS Lymph Nodes--Lung: How are these fields coded when there is no description of a primary lung tumor, lymph node biopsies are negative, but biopsy of a "level 7 mass" is positive for squamous cell carcinoma? See Discussion. | Example: Chest CT: Enlarging subcarinal mass, 3.4 cm, is most likely malignant adenopathy or perhaps primary tumor. The clinician subsequently described a patient history of mediastinal lymphadenopathy. He stated that a PET scan revealed multifocal thoracic disease consistent with stage 3B carcinoma. This was followed by mediastinoscopy with lymph node biopsies (all negative) but the biopsies of "level 7 mass and subcarinal level 7 mass" showed squamous cell carcinoma. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.If this case is determined to be a lung primary, code the CS fields: CS Tumor Size: 999 [Unknown] CS Extension: 99 [Primary tumor cannot be assessed] CS Lymph Nodes: 20 [Subcarinal lymph node involvement] based on positive level 7 biopsy, history of mediastinal lymphadenopathy and subcarinal "adenopathy" per CT. |
2005 |
|
20041064 | CS Tumor Size/CS Extension/CS TS/Ext-Eval--Breast: How do you code these fields when the tumor size and extension differ pre and post treatment with neoadjuvant Arimidex? See Discussion. | Clinically on PE 3 cm mass attached to skin with dimpling and erythema overlying the mass. Ultrasound: 2-3 cm breast mass with overlying skin thickened by US evaluation, suggesting dermal invasion. Neoadjuvant Arimidex followed by MRM. Path: 4.5 cm ductal carcinoma (no DCIS), no invasion of skin. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Record the larger tumor size and the farthest extension documented.
Code CS Tumor Size/Extension Evaluation to 6 [Surgical resection performed, WITH pre-surgical systemic treatment...; tumor size/extension based on pathologic evidence].
Code CS Tumor Size for the example to 045 [4.5 cm].
Code CS Extension to 20 [Local skin involvement ...] based on clinical description provided. |
2004 |
|
20051002 | CS Tumor Size/CS Site Specific Factor 6--Breast: How are these fields coded for a tumor stated to have only in situ disease in the breast with bone metastasis identified on scan? See Discussion. | 4/20/04 Quadrantectomy: "Tumor involves a significant portion of the biopsy and is estimated at 10 cm in greatest dimension." The only other mention of size is from imaging studies which is 3.5 cm. The histology is "high grade ductal carcinoma with comedo necrosis. No invasive carcinoma identified." Bone scan on 4/20/04 shows "widespread metastatic disease to bone." By rule the behavior code for this case is changed to malignant. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2. Code tumor size as 100 [10 cm]. Size from pathology or operative report is preferred over size from imaging.
Code SSF6 as 050 [Invasive and in situ components present, size of entire tumor coded in CS Tumor Size because size of invasive component not stated and proportions of in situ and invasive not known.]
There is invasive tumor present (as proven by the bone metastasis), but the size and proportion of the invasive component is unknown.
Please note: Extension must be coded at least to 10 [Confined to the breast tissue and fat including nipple and areola; Localized, NOS] in this case. Do not assign extension code 00 [in situ]. |
2005 |
|
20071115 | CS Tumor Size/CS Site Specific Factor--Breast: How do you code the CS Tumor size and SSF6 fields for a breast cancer described as "Paget disease with underlying intraductal carcinoma (4cm x 3.2cm)"? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.CS Tumor Size: Assign code 040 for tumor size and code SSF6 as 050 [Invasive and in situ components present, size of entire tumor coded in CS TS]. The size of the invasive component is not stated AND proportions of in situ and invasive are not known. |
2007 | |
|
20061039 | CS Tumor Size/CS Site Specific Factor--Breast: Should the tumor size be coded to 1.5 cm or 2.5 cm and SSF6 coded to 020 or 030 respectively for a tumor with invasive and in situ components described as being a 2.5 cm tumor with a "greater than" 1.5 cm invasive portion? See Discussion. | Should tumor size be coded to 1.5 cm and SSF6 coded to 020 [Invasive and in situ components present, size of invasive component stated and coded in CS Tumor Size] or should the tumor size be 2.5 cm with SSF6 coded to 030 [Invasive and in situ components present, size of entire tumor coded in CS Tumor Size because size of invasive component not stated and in situ described as minimal (less than 25%)]? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2. Code CS tumor size 992 [stated as greater than 1 cm] and SSF6 code 020. The September 2006 revision to the CS Tumor Size table now lists the 992-995 range codes as "greater than ___ cm." It is better to code the invasive size than the entire size of the tumor. In the TNM mapping, this would more accurately portray the tumor as T1c rather than T2. |
2006 |
|
20091045 | CS Tumor Size/CS Site Specific Factor--Breast: When tumor size is unknown, but it is known that both in situ and invasive components are present, how should CS Tumor Size and SSF6 be coded? See Discussion. | We coded CS Tumor Size 990 and SSF 6 to 060 for a case in which no tumor size was mentioned and the breast core biopsy identified microinvasive infiltrating lobular carcinoma and lobular carcinoma insitu. The lumpectomy identified no residual tumor. SEER edit 218 states we must have CS Tumor Size as 999 if the CS SSF 6 is 060. Yet the tumor size code of 990 (Microinvasion; microscopic focus or foci only, no size given; described as less than 1 mm) would more accurately reflect this case. Even in a situation where there was microinvasion described as less than 1mm, the edit will not allow one to code CS Tumor Size to 990 with the CS SSF 6 as 060. Should these types of cases have CS Tumor Size coded 999 or should the edit be adjusted to allow for this combination? | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS tumor size 990 [Microinvasion; microscopic focus or foci only, no size given; described as less than 1 mm] and CS SSF6 050 [Invasive and in situ components present, size of entire tumor coded in CS Tumor Size because size of invasive component not stated AND proportions of in situ and invasive not known].
This combination of codes captures the information available for this case. |
2009 |
|
20041075 | CS Tumor Size: Can we take the size of a "polypoid" mass? See Discussion. | 3/04 Colonoscopy: 4 cm semi-circumferential friable mass in sigmoid colon. Path: Tubulovillous adenoma indeterminate for malignancy. 4/04 Sigmoid Colectomy: 5 x 4 polypoid mass: WD Adenocarcinoma arising in a tubulovillous adenoma. Define "Polypoid". Size of "polypoid" mass. Would the size be coded to 050 or 999? |
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.If the pathology report confirms that the entire polyp is malignant, code the size of the polyp/polypoid mass. If the pathology report does not confirm that the entire polyp is malignant, code 999. Code tumor size as 999 [Unknown] for the example above. Do not code the size of the polypoid mass in this example. The size given above is the size of the polypoid mass, not the size of the malignancy. Polypoid means "Like a polyp. |
2004 |
|
20081018 | CS Tumor Size: Is a 5.5 mm tumor coded as 005 or 006? See Discussion. | We interpret the CS Manual general instructions to indicate to ONLY round up to 001 when the tumor size is stated to be 0.1 to 0.9mm. | This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS tumor size 006. Because only whole numbers in mm can be collected, basic mathematical principles are used for rounding; 1-4 round down, 5-9 round up. |
2008 |
|
20051064 | Cancer-Directed Treatment/Surgery of Primary Site--Anus: Is "infrared coagulation" coded as surgery or "other" treatment for anal canal primaries? | Do not code infrared coagulation -- it is not treatment for cancer. | 2005 | |
|
20071131 | Cell indicator--Lymphoma: If the primary site for a lymphoma is stated to be the lymph nodes but there is no biopsy of a lymph node, can the immunophenotype designation for a lymphoma be coded based on a bone marrow or liver biopsy indicating "diffuse large B-cell lymphoma"? | For cases diagnosed prior to 1/1/2010: The cell indicator or immunophenotype designation for lymphomas may be coded from pathology reports on tissue from bone marrow or liver when there is no tissue from the primary site. Code information on cell type from any available source. See the Appendix C of the 2007 SEER manual, Coding Guidelines for Lymphomas, pages C-1055 to C-1056 for more information about coding this field for lymphomas. For cases diagnosed 1/1/10 and later, refer to the Hematopoietic and Lymphoid Neoplasm Case Reportability and Coding Manual and the Hematopoietic Database (Hematopoietic DB) provided by SEER on its website to research your question. If those resources do not adequately address your issue, submit a new question to SINQ. |
2007 |