CS Tumor Size--Lung/Breast: Explain why the SEER instructions differ from the CS Manual regarding priority order of sources to code tumor size? See Discussion.
Regarding the 2004 SEER Manual, Appendix C, Site Specific Coding Modules, Lung and Breast. The priority of sources for coding tumor size is Pathology, Operative Report, PE, imaging for breast and pathology, operative, endoscopic, and imaging for lung. This differs from the CS Manual instructions.
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.For cases diagnosed in 2007 and forward, follow the instructions in the 2007 SEER manual and the CS manual.
CS Tumor Size--Lung: If a 5/11/07 CT showed a 6.5 cm LLL mass and a 7/24/07 CT showed 8.4 cm LLL mass, do we code the larger tumor size identified within four months of diagnosis or do we code the first size documented at the time of diagnosis?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code the larger tumor size.
CS Tumor Size--Lung:. Does code 997 (diffuse, entire lobe) for lung and main stem bronchus take precedence over a stated tumor size? See Discussion.
Per SPCSM 2007 'Coding Instructions for CS Staging Data Items-CS Tumor Size' item 5c states that code 998 (diffuse, entire lung) for lung and main stem bronchus takes precedence over any mention of size. Does this apply to code 997 as well?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code the stated tumor size rather than 997. Code 997 does not take precedence over tumor size at this time. According to CoC, the instructions in the CS Manual, Part I-27, rule 5c are to alert the user to special circumstances. Code 997 is not included because it is not diffuse for all of the sites listed. The site-specific rules and codes in the schema always take precedence. Further instructions and clarifications will be added to the lung schema, CS Manual Part II-317 in the next version of CS.
CS Tumor Size--Melanoma: How is this field coded when a smaller invasive and a larger in situ melanoma are reported as a single primary? See Discussion.
Patient has a 1.2 cm lesion right upper arm with a diagnosis of melanoma in situ. A second lesion on right wrist, 0.5 cm mole, has a diagnosis malignant melanoma, Breslow's 0.78, Clark's level III.
According to the 2007 MP/H rules, this is a single primary. Because the larger lesion is completely in situ, do you ignore it altogether and go with the smaller, invasive lesion? SEER Program Manual 2007, page 127, rule 4.l, states that when two lesions are reported as a single primary, code the size of the larger lesion, which in this case would be the in situ.
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS Tumor Size as 005 (0.5 cm). Code CS Tumor Size based on the invasive lesion.
Use the data items "Multiplicity Counter" and "Type of Multiple Tumors Reported as One Primary" to document that there are two tumors present, in situ and invasive.
CS Tumor Size--Ovary: Can the size of a tumor mass shadow seen on a CT scan be used to code CS Tumor Size? See Discussion.
Ovarian primary: No surgery performed. CT abd/pelvis states "Bilateral pleural effusions, ascites. Right appendix region with tumor mass shadow 3 x 8 x 3.9cm"
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code CS tumor size 999 [Unknown; size not stated]. The size of the tumor is not known in this case.
Note that tumor size is not used for AJCC staging for ovary.
CS Tumor Size--Ovary: The size of a cyst is not coded in this field. However, can the size of a "cystic mass" be coded in this field? See Discussion.
The specimen consists of a cystic mass which weighs 1520 grams and measures 23 x 17 x 10 cm.
If the tumor is described as a "cystic mass" and only the size of the entire mass is given, code the size of the entire mass, because the cysts are part of the tumor itself.
Please note: Ovarian cancer stage is not based on tumor size.
CS Tumor Size--Rectum: Should the tumor size be coded to 080 from the colonoscopy size or 075 from the CT scan size? See Discussion.
6/29/04 Colonoscopy with biopsy: near obstructing circumferential friable mass extending from 8 to 16cm above anal verge. 6/30/04 CT Scan Abdomen/Pelvis: 7.5X7.2cm large rectal mass. The patient had radiation with concurrent 5-FU. Surgery is done after treatment.
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Code tumor size as 080 (8cm). Code the largest pretreatment size recorded when there is preoperative systemic treatment.
CS Tumor Size--Unknown & ill-defined site: For an unknown primary site, should this field be coded to 000 [No mass/tumor found] or 999 [Unknown; size not stated; not stated in patient record]?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Code the CS Tumor Size field to 999 [Unknown; size not stated; not stated in patient record] when the primary site is unknown.
There is a discrepancy in Part I of the CS Manual on page 27, rule 5g, which says that primary site C80.9 should be coded as 888 not applicable. The CS Steering Committee has decided that the last line about unknown and ill-defined sites should be deleted from rule 5g. This issue will be addressed in a CS errata to be distributed in July 2004.
CS Tumor Size/CS Eval--Breast: How are these fields coded when there is a clinical size recorded but the tumor size is not specified on the pathology report associated with a subsequent resection? See Discussion.
4/8/04 excisional biopsy of 1.5 cm palpable mass. Path: gives a specimen size only and states that there is a nodular firm area that correlates with the clustered microcalcification on radiograph. No pathologic tumor size is given. Would the size be coded to the clinical size of 1.5 cm? The patient did have surgery but the only size available is a clinical one. Because the size is clinical, is the CS Eval field coded to 0 [No surgical resection done. Evaluation based on PE...]?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
Clinical size can be coded when the patient has had surgery. For the case above, code the tumor size as 015 [1.5 cm] using the clinical information. The CS Tumor Size/Extent Eval field refers to both tumor size and extension. In this case, record the eval field as 0 or 1 (which ever is appropriate). The tumor size sets the T category unless the resection shows skin or chest wall or dermal lymphatic involvement.
CS Tumor Size/CS Extension--Brain and CNS: How are these fields coded for a glioblastoma multiforme occurring in a 3.5 cm tumor in the parietal lobe and a 3.0 cm tumor in the occipital lobe?
This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.
CS Extension code is 10 [confined to cerebral hemisphere]. Record the size of the largest lesion in CS Tumor Size. Both the occipital and parietal lobes are supratentorial and confined to the cerebral hemisphere with no mention of crossing midline or involvement of ventricles.
An official website of the United States government
Home