System Guide
Back to Search Results

Search Results

Display Options
Display Options
Select Fields
Export Results to CSV Create Report 0
+ Add all results to report

Report Produced: 11/26/2024 07:42 AM

Report Question ID Question Discussion Answer Year
20081089 Multiplicity Counter--Thyroid: How is this field coded for a tumor described as "multinodular carcinoma of the thyroid"? See Discussion. This information is from a pathology report. No other information is available. Count the number of measured nodules. If the nodules are not measured, code 99 in the multiplicity counter. 2008
20071124 Multiplicity Counter-Breast: The general instructions say to ignore separate microscopic foci when determining when to use the single tumor or multiple tumor modules. Do these instructions apply if sizes are given for the foci? See Discussion. For instance, would a 1.2 cm breast tumor with 3 scattered microscopic foci ranging from 2-4 mm be treated as multiple tumors (4), or as a single tumor? If the microscopic foci are measured and listed as part of the diagnosis, they should be counted as multiple tumors. 2007
20081107 Multiplicity Counter/Ambiguous terminology: How should these fields be coded for cases with an unknown date of diagnosis? If the date of diagnosis is unknown, it is likely that you have little information for this case. Both multiplicity counter and ambiguous terminology fields would probably be coded as unknown. However, if information on the number of tumors and the diagnostic confirmation are available, code these fields as specified in the manual. 2008
20071101 Multiplicity Counter/CS Tumor Size: The Multiplicity Counter rule 6c states "Use code 99 when the tumor is described as diffuse". Is code 99 used in all circumstances when tumor size is coded to 998? See Discussion. The CS manual lists esophagus, stomach, familila/familial polyposis (colon), lung, and breast as the only circumstances when code 998 is valid. If this is correct, then if TS is coded to 998, then Multiplicity Counter must be 99. If the number of tumors is known, code the number in Multiplicity Counter. If the number of tumors is not known, assign code 99. If "diffuse" is the only information available to describe the tumor, assign code 99. 2007
20110072 Multiplicity Counter/Date Multiple Tumors--Bladder: How are these fields coded when multiple tumors were present at the time of diagnosis and another tumor diagnosed a year later is determined to be the same primary? See Discussion. In November 2007, a nephroureterectomy showed an invasive TCC of the renal pelvis and a separate in situ TCC of the ureter. The Multiplicity Counter field is coded 02 and the Date Multiple Tumors is coded to November 2007. In December 2008, an in situ bladder tumor is found. Are the multiplicity fields to be updated to reflect the new bladder tumor?

Multiplicity Counter field was initially coded 02. Change the code to 03 because the subsequent, additional tumor was determined to be the same primary. Update the Multiplicity Counter field only once. If additional tumors are determined to be the same primary for this case, it is not necessary to update this field again.

Date of Multiple Tumors field was initially coded November 2007. Multiple tumors were present at the time of the initial diagnosis. Do not change the date of this field when additional tumors are subsequently diagnosed. This data item reflects the earliest date that multiple tumors were present. See example 2 under #3 on page 81 of the 2010 SEER manual.

2011
20071098 Multiplicity Counter/Date of Multiple Tumors/CS Tumor Size--Lung: How are these fields to be coded when work-up of a malignancy spans a couple of months and reveals developing nodules? See Discussion. Example: Chest CT on 4-26-07 reveals 2.2 cm mass in lingula, left lung, consistent with lung malignancy. Biopsy on 5-18-07 shows non-small cell carcinoma. PET scan on 6-6-07 shows left upper lobe mass consistent with known non-small cell lung carcinoma. Second developing mass increasing in prominence since 4-07 in periphery of left upper lobe, approximately 3.6 cm which may represent intrapulmonary mets or second primary neoplasm. At least 3 additional intrapulmonary nodules have developed since 4-07, two in the left upper lobe and one in the right upper lobe, suspicious for mets.

This answer was provided in the context of CSv1 coding guidelines. The response may not be used after your registry database has been converted to CSv2.Multiplicity Counter/Date of Multiple Tumors

Apply the multiple primary rules first and record the number of tumors determined to be a single primary in Multiplicity Counter. Record the corresponding date in Date of Multiple Tumors. These data items may be updated once if future tumors are determined to be the same primary as the initial diagnosis.

CS Tumor Size

Include information gathered through

  • completion of surgery(ies) in first course of treatment OR

  • all information available within four months of the date of diagnosis in the absence of disease progression

    • WHICHEVER IS LONGER.

    Metastasis known to have developed after the diagnosis was established should be excluded.

    		 2007
    		20071090 Multiplicity Counter/Type of Multiple Tumors--Breast: How are these data items coded for a single breast primary composed of both in situ and invasive disease when measurements are provided for both the invasive and in insitu components? See Discussion. Breast cancer, invasive duct carcinoma with DCIS, 1.3 cm, DCIS 3.7 cm. "The in situ carcinoma is very extensive in this lumpectomy. It is present contiguously from sides 1A through 1L sparing only the final 8 mm of medial margin. In situ and invasive carcinoma are prominently present along almost the entire superior margin." Is the mult counter 02 with Type of mult tumor 30, or one tumor? Because there are individual measurements for each of these tumors, code the multiplicity counter 02 [Two tumors present]. Code Type of Multiple Tumor as 30 [In situ and invasive]. 2007
    		20091131 Multiplicity Counter/Type of Multiple Tumors--Breast: How are these fields coded when a patient underwent a lumpectomy demonstrating two measured foci of invasive ductal carcinoma (1.5 cm and 3 mm) and "focally seen" in situ ductal carcinoma (DCIS) followed by a re-excision that is positive for 1.5 mm focus of residual invasive carcinoma? See Discussion.

    Lumpectomy path shows two foci of invasive ductal carcinoma, 1.5 cm & 3 mm sizes, and CAP summary lists "DCIS: focally seen", no further description. The re-excision pathology specimen finds a 1.5 mm focus of residual invasive carcinoma, very close to the new inferior margin (so registrar assumed this was probably not part of the previously excised mass), and no mention of any more in situ.

    Can we assume the DCIS was associated with/part of the invasive tumors because it was not measured or described separately? If we say there are 3 tumors (for the measured invasive foci), should Type of Multiple Tumors be coded 30 [In situ and invasive] or 40 [Multiple invasive]?

    Code 03 [3 tumors] in the multiplicity counter. Do not count the "focally seen" DCIS because it was not measured.

    Code 30 [In situ and invasive] in Type of Multiple Tumors Reported as One Primary. The single primary reported for this case is a combination of in situ and invasive tumors.

    		2009
    		20081066 Multiplicity Counter/Type of Multiple Tumors--Breast: How should these fields be coded when path shows a 1.2 cm infiltrating carcinoma with lobular features and several foci of infiltrating lobular carcinoma [7 foci described as multifocal], 1 large focus, and numerous foci of LCIS and CIS with lobular and ductal features? Should we count the foci or separate tumor nodules, ignore them, or code unknown values for these fields? See Discussion.

    Scenario: 10/17/07: Right axilla soft tissue bx - infiltrating mammary ca with lobular features arising within apparent breast tissue present within axilla. Tumor size 1.2 cm. 11/3/07: Right breast, reexcision lumpectomy - Several foci of infiltrating lobular CA. (2) foci & (5) foci within specimen (multifocal). (1) large focus also present. No lymphovascular invasion identified. Numerous foci LCIS. Pleomorphic LCIS & CIS with lobular and ductal features. Margins free of invasion however margins diffusely involved with LCIS.

    When do you count foci or separate tumor nodules, when do you ignore them, and when do you code unknown values for these fields? Coding instruction 3b states, "When the tumor is multifocal or multicentric and the foci of tumor are not measured, code as 99." Instruction 4b states, "Use code 01 when there is a single tumor with separate foci of tumor." Finally, instruction 6b states, "Use code 99 when the tumor is described as multifocal or multicentric and the number of tumors is not given," which seems to imply that if we know the number of tumors, we would code that number.

    Multiplicity Counter: Use instruction 4b. Since there is one measured tumor and the foci were not measured, code the multiplicity counter 01 [One tumor only].

    Type of Multiple Tumors: Code Type of multiple tumors 00 [Single tumor].

    		 2008
    		20071043 Multiplicity Counter: Are in situ tumors diagnosed more than 60 days after invasive tumors of the same site and histology included in the Multiplicity Counter? If an in situ tumor following an invasive tumor is a single primary according to the multiple primary rules for that particular site, include the in situ and the invasive tumors in the multiplicity counter. 2007